This website is accessible to all versions of every browser. However, you are seeing this message because your browser does not support basic Web standards, and does not properly display the site's design details. Please consider upgrading to a more modern browser. (Learn More).

You are here: home > living > home

Operating and maintaining your heat pump

Posted Tuesday, November 8, 2005

e-mail E-mail this page   print Printer-friendly page

Proper operation of your heat pump will save energy. Do not set back the heat pump's thermostat if it causes the backup heating to come on; backup heating systems are usually more expensive to operate. Continuous indoor fan operation can degrade heat pump performance unless a high-efficiency, variable-speed fan motor is used. Operate the system on the "auto" fan setting on the thermostat.

Like all heating and cooling systems, proper maintenance is key to efficient operation. The difference between the energy consumption of a well-maintained heat pump and a severely neglected one ranges from 10%–25%.

Clean or change filters once a month or as needed, and maintain the system according to manufacturer's instructions. Dirty filters, coils, and fans reduce airflow through the system. Reduced airflow decreases system performance and can damage your system's compressor. Clean outdoor coils whenever they appear dirty; occasionally, turn off power to the fan and clean it; remove vegetation and clutter from around the outdoor unit. Clean the supply and return registers within your home, and straighten their fins if bent.

You should also have a professional technician service your heat pump at least every year. The technician can do the following:

* Inspect ducts, filters, blower, and indoor coil for dirt and other obstructions
* Diagnose and seal duct leakage
* Verify adequate airflow by measurement
* Verify correct refrigerant charge by measurement
* Check for refrigerant leaks
* Inspect electric terminals, and if necessary, clean and tighten connections, and apply nonconductive coating
* Lubricate motors, and inspect belts for tightness and wear
* Verify correct electric control, making sure that heating is locked out when the thermostat calls for cooling and vice versa
* Verify correct thermostat operation.

 
e-mail E-mail this page
print Printer-friendly page
 
 
 
Operating and maintaining your heat pump
Latest articles in Home
 
What does the average wedding cost? $31,213
 
ShopSmart’s simple fall fix-ups
 
ShopSmart’s instant clutter busters
 
 
 
Living

Got Feedback?
Send a letter to the editor.

Subscribe
Sign up for the Chatham Chatlist.

Advertise
Promote your brand at chathamjournal.com.



Subscribe now: RSS news feed, plus FREE headlines for your site